Common Plumbing Problems Every Homeowner Should Know About

Plumbing is an essential yet often overlooked part of any home. Unfortunately, plumbing issues are a common occurrence and can cause significant problems if left unchecked. Knowing how to identify and address common plumbing problems can help homeowners maintain a safe, hygienic environment for their family and prevent costly repairs. This article explores the most common plumbing issues every homeowner should be aware of.

The first type of problem that homeowners may encounter is blocked drains. Blocked drains are caused by a build-up of foreign objects such as food particles, hair strands or hygiene products that accumulate over time and cannot pass through the pipes. The resulting blockage can lead to overflowing sinks, toilets and showers as well as unpleasant odours from within the pipework. It is important to take immediate measures to clear any blockages that occur in order to avoid further damage.

Leaks are another major plumbing issue that homeowners must be aware of. Leaks can occur for various reasons, including faulty fittings or worn seals around pipes or taps. Leaks can cause water waste, damage property and even create health risks due to mould growth in damp areas. Regularly inspecting pipes and fixtures on both the interior and exterior of the house is an important step towards identifying potential leaks before they become serious issues.

Leaky Faucets

Leaky faucets are a common problem that many homeowners face. Most often, a leaky faucet is caused by the deterioration of rubber washers or O-rings within the valve assembly. This can cause water to seep through tiny cracks and crevices, leading to significant water loss over time. Water damage can also occur due to a faulty valve seat, which is located in the base of the faucet and prevents water from flowing out when it shouldn’t. Furthermore, mineral build up from hard water can cause corrosion inside these components and lead to leakage.

Fortunately, fixing a leaky faucet is not an intimidating task for most DIYers—in most cases all that’s needed is a wrench and some replacement parts that you can purchase at any hardware store. Before attempting repairs, be sure to turn off the main shutoff valves for both hot and cold water lines feeding into the faucet so no additional damage occurs during repair. Once you have new parts in hand, start replacing them one at a time, beginning with the washer or O-ring first as this will usually solve the problem. If replacement doesn’t work, you may need to replace other parts such as the stem or cartridge assembly.

For those who don’t feel comfortable performing repairs on their own, there are plenty of plumbing professionals available who specialize in repairing leaking fixtures at an affordable cost. With their expertise and knowledge they can quickly identify and repair any issues you may have with your leaky faucets in no time at all, saving you money on wasted water and preventing further damage down the line.

Clogged Drains

Clogged drains are a common issue, both in residential and commercial plumbing systems. Clogs can be caused by a build-up of debris and sediment, such as food particles, soap scum, hair, or foreign objects. Additionally, clogs can be the result of corrosion in the pipes due to age or improper installation. It is important for homeowners to be aware of these potential issues and take steps to prevent them from occurring.

One of the most effective ways to prevent clogs is through regular maintenance of the plumbing system. This includes regularly cleaning out drains and checking for any signs of corrosion or damage. Homeowners should also avoid using chemical drain cleaners as they often contain caustic substances that can cause additional damage to plumbing systems over time. Instead, it is best to use manual methods such as plungers or snake augers to clear out any blockages in the pipes.

In addition, it is important for homeowners to be aware that attempting to clear a clog themselves can often do more harm than good if not done properly. If there are any signs of corrosion in the pipes, then it may be necessary to call a professional plumber who will have the experience and knowledge needed to safely diagnose and repair any plumbing problems that may exist. Taking preventive measures and being mindful of potential risks with DIY repairs can help ensure that clogged drains stay clear for years to come.

Low Water Pressure

It’s a common sight in any home—the showerhead sputtering out a trickle of water instead of the expected deluge. Low water pressure is one of those pesky fixtures that can make life miserable when it strikes. But fear not, dear homeowner! There are solutions to this problem that will get your faucet back up and running in no time.

First, let’s look at the causes of low water pressure. Low water pressure can be caused by a variety of things, such as clogged pipes, broken pipes, or blocked valves. It may also be due to an issue with your home’s main water supply line or even the pressure regulator installed on it. In some cases, it could even be related to age-related deterioration of plumbing fixtures or infrastructure.

Once you’ve identified the cause for the low water pressure in your home, you’ll need to find a solution to fix it. Depending on what you identify as the source of the issue, options may range from simple fixes like unclogging a pipe or replacing a fixture to more complex solutions like installing a new main line or replacing an entire section of existing plumbing infrastructure. You may also want to consider upgrading older fixtures and appliances with newer models that offer better efficiency and performance.

In any case, if you’re dealing with low water pressure in your home, don’t despair! With a little bit of research and effort, you can easily find the source of the issue and take steps to fix it—and soon enough you’ll have great-tasting tap water flowing again!

Running Toilets

Moving on from low water pressure, running toilets are another common plumbing problem every homeowner should know about. A running toilet is often caused by a faulty flapper, which is the rubber stopper at the bottom of the toilet tank that controls water flow into the bowl. If the flapper is worn out or loose, it will not seal properly and can allow water to continuously run into the bowl. This wastes a considerable amount of water and can lead to higher utility bills.

In order to fix a running toilet, homeowners need to first identify whether it is caused by a faulty flapper or something else. If it is determined that the flapper needs to be replaced, then shut off the water supply valve located behind the toilet, flush and hold down the handle for all remaining water in the tank to drain out. Then unscrew any fasteners holding down the tank lid and remove it before taking out the old flapper and replacing it with a new one. Finally, turn on the supply valve and flush again to test if there are still any leaks.

To prevent this issue from recurring in future, homeowners should inspect their toilet’s flappers regularly for signs of deterioration such as cracks or discoloration. Additionally, they can purchase an adjustable flapper with an adjustable arm length so that they can adjust its height according to specific conditions like varying levels of water pressure in order to ensure that it always seals properly.

Burst Pipes

One of the most unfortunate plumbing problems any homeowner can experience is an unexpected burst pipe. Pipe bursts are often caused by water pressure that has built up over time and is too much for the pipes to handle. They can also be caused by corrosion, which weakens the pipes and makes them more susceptible to bursting. In either case, a burst pipe can cause extensive damage to both your property and your wallet.

The first step in dealing with a burst pipe is to shut off the main water valve at once. This will help to limit and control the flow of water from the burst pipe, thus preventing further damage and costly repairs. Once you have done this, it is important to call a professional plumber as soon as possible so they can assess the situation and repair or replace any damaged pipes.

With careful attention paid to warning signs such as noises coming from plumbing fixtures or damp patches appearing on walls or ceilings, homeowners can take steps to reduce the risk of experiencing a burst pipe in their home. Regular maintenance checks can also alert you to potential issues before they become more serious and expensive problems down the line.

Auburn Tigers Plumbing Co: Plumbing Contractors You Can Trust

At Auburn Tigers Plumbing Co, we specialize in a wide range of plumbing services in Auburn, Alabama, from small repairs to major remodeling projects. No job is too small or too big for our experienced plumbing contractors. Contact us today to find out how we can help you with all your plumbing needs.